Daikin MicroTech - Page 67


www.DaikinApplied.com 67 OM 1280-2 • MICROTECH UNIT CONTROLLER
Menu Name
(Menu Index)
Minimum Password to Read
(None, User, Manager, Technician)
Minimum Password to Write
(None, User, Manager, Technician)
“RO” if Read Only
Help Text
Set|Unit
InFanSel: N T Indoor fan select.
CompType: N T Compressor type.
SplitSysSel: N T Split or non-split system.
ValveType: N T Valve type.
WtrPipes: N T Select 2 pipe or 4 pipe.
FBDmprEn: N T Face and bypass damper enable.
ElHtStgs: N T 
EconSel: N T Select outdoor enthalpy calc strategy.
BypassTime: N M Local bypass time.
EmergHtEn: N T Emergency Heat Enable.
EmergHtSpt: N T Emergency Heat Setpoint.
MnPmpOnTime: N T Min pump on time before comp can turn on.
EmrgHtShtDnEn: N T Dly after powerup before comp turn on.
Set|SensorInstall
SpcTmpSens: T T Space temp sensor.
CondOFlwSn: T T 
OATSens: T T Outside air temp sensor.
LWTSens: T T Leaving water temp sensor.
InHumSens: T T Indoor humidity sensor.
OutHumSens: T T Outdoor humidity sensor.
RATSens: T T Return air temp sensor.
HiPrsBIAvl: T RO High pressure binary input avail.
InCoilTSen: T RO Indoor coil temp sensor.
OutCoilTSn: T RO Outdoor coil temp sensor.
EWTSens: T RO Entering water temp sensor.
CO2RstSens: T RO CO2 sensor installed.
FrzStatBIAvl: T RO Freeze stat binary input avail.
ExhILkBiCf: T RO 
DmpEnd1Avl: T RO 
DmpEnd2Avl: T RO 
BLessEHAvl: T RO 
VLckOutAvl: T RO 
UnOccAvl: T RO 
ShutDnAvl: T RO 
DehumAvl: T RO 
RstVoltSens: T RO Reset volts sensor.
Set|Setpoints
󰀨 N U 󰀨
OccClSpt: N U Occupied cooling setpoint.
OccHtSpt: N U Occupied heating setpoint.
UnoccClSpt: N U Unoccupied cooling setpoint.
UnoccHtSpt: N U Unoccupied heating setpoint.
StdbyClSpt: N U Bypass cooling setpoint.
StdbyHtSpt: N U Bypass heating setpoint.
󰀨 N M 󰀨
󰀨 N M 󰀨
SptMeth: N U Setpt calculation method.
CntrlTmpSel: N M Space or RAT for control temp.
KeySptOfstSel: N U 󰀨
Set|IndoorFan
FanChgsPerHr: N M Allowed fan changes per hour.
󰀨 N T 󰀨
FanCycling: N M Continuous or cycling in occ mode.
FanOnInUnocc: N M Indoor fan runs in unoccupied mode.
FanCntrlMeth: N T Method controlling indoor fan.
BrkptAutoLow: N M Speed transition for low fan.
BrkptAutoMed: N M Speed transition for medium fan.
BrkptAutoHigh: N M Speed transition for high fan.
󰀨 N M 󰀨
PWMLow: N M PWM_3Fixed low fan speed.
PWMMed: N M PWM_3Fixed medium fan speed.
PWMHigh: N M PWM_3Fixed high fan speed.
RstMnFan: N M Min fan when controlled by reset.
RstMxFan: N M Max fan when controlled by reset.