INSTALLATION
NAVIGATOR WWV/TWVDAIKIN APPLIED
14
Type B Knockdown, “Bolted
Construction, Shipped as Parts”
Compressor(s), power boxes and control box are removed at the
factory and shipped on separate skids; combined vessel stack is
shipped together as a sub-assembly.
Type B Scope:
• All associated piping and wiring remain attached, if
possible.
• All free piping ends are capped.
• Unit ships with vessel and/or head insulation, if ordered.
• Refrigerant will not be shipped with the chiller and must be
procured by others.
• Compressor(s) and vessels receive an inert gas holding
charge.
• Unit ships with replacement refrigerant gaskets and O-rings,
stick-on wire ties, and touch-up paint.
• Unit is fully tested at the factory prior to shipment.
• Site reassembly must be supervised or completed by
Daikin Applied service personnel. Cost for unit reassembly
and supervision by Daikin Applied service is not included in
the purchase price of the equipment. Contact Daikin Applied
service for pricing.
• Ideal for retrot applications where it is desired that the
compressor(s), power box, and control box be removed at
the factory, prior to shipment, and where refrigerant may be
secured by others.
Compressor Dimensions
Figure 12: WWV Compressor Dimension Schematic
Table 3: Compressor Dimensions and Weights
Com-
pressor
Dimensions
Model Length (in) Width (in) Height (in) Weight (lbs)
JNNS 60.5 27.1 28.0 1534
MNNS 61.6 28.0 29.1 1925
RNNS 64.6 30.5 31.4 2778
HEIGHT
LENGTH
WIDTH
To Next Page
Loading...
