25
IOM 1264-4
WWW.DAIKINAPPLIED.COM
OPERATION
Operation
Control System Architecture
Figure 20 shows an overview of the control system including all possible components, some of which will only be used if the chiller is
equipped with a particular option or certain hardware.
Figure 20: WWV Control System Overview
Operator Responsibilities
It is important that the operator become familiar with the
equipment and the system before attempting operation. During
the initial startup of the chiller, the Daikin Applied service
technician will be available to answer any questions and instruct
the proper operating procedures. It is recommended that the
operator maintain an operating log for each individual chiller unit.
In addition, a separate maintenance log should be kept of the
periodic maintenance and servicing activities.
Operator Schools
Training courses for Navigator Water-cooled Screw Maintenance
and Operation are held throughout the year at the Daikin
Learning Institute in Verona, Virginia. The class includes
instruction on basic refrigeration, MicroTech Unit Controllers,
enhancing chiller eciency and reliability, MicroTech
troubleshooting, system components, and other related subjects.
For more information, refer to the back cover of this document for
training contact information.
To Next Page
Loading...
