Daikin NetPro Dual - Option Setting Dip Switch (DIP_Option); Communication Setting Dip Switch (DIP_Unit); Network Setting Dip Switch (DIP_Network)

English
5
1 IM-5WMYJ-0113(2)DAIKIN_EN.indd7 1 IM-5WMYJ-0113(2)DAIKIN_EN.indd7 6/10/14 10:07:24 AM6/10/14 10:07:24 AM
2
3
Configure the Communication Setting Dip Switch (DIP_Unit)
UNIT CONFIGURATION
Adjusting the dip switch to “ON” position enables the function assigned to it.
Configure the Option Setting Dip Switch (DIP_Option) according to operating option
preferences and the table below:
4
Configure the Network Setting Dip Switch (DIP_Network).
* Parity setting will enable when Stop Bit is set to OFF (parity).