Daikin R35DV1 - Page 171

FT09/13DV2S, FT25/35DVM, FT25/35DSG Si01-501
162 Removal Procedure
Step Procedure Points
6. Removing the display
PCB
1
The figure shows the
connection of wire
harness for the display
PCB.
2
Remove the display
PCB by unfastening the
2 hooks.
3
Disconnect the
connector from the
display PCB.
7. Removing the control PCB
1
Dismount the control
PCB by removing the 2
hooks.