Daikin R35DV1 - R60 Dsg; Removal of the Panels and Plates

Si01-501 R60DSG
Removal Procedure 211
5. R60DSG
5.1 Removal of the Panels and Plates
Procedure Warning Be sure to wait 10 minutes or more after turning off all power supplies
before disassembling work.
Step
Procedure Points
1. Removing the panels and
plates.

Take care not to cut your
finger by the fins of the heat
exchanger.
1
Loosen the four screws
and lift the top panel.
2
Loosen the four screws
and remove the
discharge grille.