Daikin RXS24DVJU User Manual

1645 Wallace Drive, Suite 110
Carrollton, TX75006
info@daikinac.com
www.daikinac.com
AMERICAS
Organization:
DAIKIN INDUSTRIES, LTD.
AIR CONDITIONING MANUFACTURING DIVISION
Scope of Registration:
THE DESIGN/DEVELOPMENT AND MANUFACTURE OF
COMMERCIAL AIR CONDITIONING, HEATING, COOLING,
REFRIGERATING EQUIPMENT, COMMERCIAL HEATING
EQUIPMENT, RESIDENTIAL AIR CONDITIONING
EQUIPMENT, HEAT RECLAIM VENTILATION, AIR
CLEANING EQUIPMENT, MARINE TYPE CONTAINER
REFRIGERATION UNITS, COMPRESSORS AND VALVES.
Organization:
DAIKIN INDUSTRIES
(THAILAND) LTD.
Scope of Registration:
THE DESIGN/DEVELOPMENT
AND MANUFACTURE OF AIR
CONDITIONERS AND THE
COMPONENTS INCLUDING
COMPRESSORS USED FOR THEM
All of the Daikin Group’s business
facilities and subsidiaries in Japan
are certified under the ISO 14001
international standard for
environment management.
Specifications, designs and other content appearing in this brochure are current as of June 2009 but subject to change without notice.
SiUS04-904
Printed in U.S.A. 06/2009 B AK
SiUS04 - 904
[Applied Models]
 Inverter Pair : Heat Pump
Inverter Pair
Wall Mounted Type H-Series
SiUS04-904Service Manual / Inverter Pair Wall Mounted Type H-Series

Daikin RXS24DVJU Specifications

General

Heating Capacity	3.2 kW
Power Supply (Model 3)	220-240V, 50Hz
Refrigerant	R32
Indoor Unit Dimensions (W x H x D)	800 x 295 x 230 mm
Type	Split System Air Conditioner

Summary

Part 1 List of Functions

Functions

Detailed list of operational functions for SEER 16 and SEER 13 models.

Part 2 Specifications

Specifications

Technical specifications for SEER 16 and SEER 13 models, including capacity, power, and dimensions.

Part 3 Printed Circuit Board Connector Wiring Diagram

Printed Circuit Board Connector Wiring Diagrams

Detailed connector wiring diagrams for various indoor and outdoor unit models.

Part 4 Function and Control

Main Functions Overview

Details various operational functions including airflow, modes, and special features.

Thermistor Functions

Explains the function of different thermistors in controlling system operation and detecting faults.

Control Specifications

Explains control logic and operating parameters for different model classes.

Part 5 Operation Manual

System Configuration

Instructions for system configuration after installation.

Model-Specific Operation

Detailed operational procedures for FTXS09/12HVJU and FTXS15/18/24HVJU models.

Part 6 Service Diagnosis

Diagnostic Precautions and Checks

Safety guidelines for diagnosis, symptom analysis, service checks, and component checks.

Troubleshooting and Error Codes

Comprehensive list of error codes and detailed troubleshooting steps for various system malfunctions.

Part 7 Removal Procedure

Model-Specific Removal Procedures

Step-by-step guides for removing components from different indoor and outdoor unit models.

Part 8 Other Considerations

Trial Operation, Jumper Settings, and Grease Application

Guidance on trial operation, address setting via jumpers, and silicon grease application.

Part 9 Appendix

Appendix: Piping and Wiring Diagrams

Contains essential piping and wiring diagrams for indoor and outdoor units.