3 | Specific installer safety instructions
Installer reference guide
20
RXTJ-A_RXTA-C_RXTM-A_RXTP-A
R32 split series
4P728168-1 – 2023.03
WARNING
Prevent hazards due to inadvertent resetting of the thermal cut-out: power to this
appliance MUST NOT be supplied through an external switching device, such as a
timer, or connected to a circuit that is regularly turned ON and OFF by the utility.
DANGER: RISK OF ELECTROCUTION
▪ When the unit is NOT operating, the LEDs on the PCB are turned OFF in order to
save power.
▪ Even when the LEDs are OFF, the terminal block and the PCB may be powered.
To Next Page
Loading...
Need help?
General
