6 | Unit installation
Installer reference guide
29
RXTJ-A_RXTA-C_RXTM-A_RXTP-A
R32 split series
4P728168-1 – 2023.03
6.3.2 Precautions when mounting the outdoor unit
INFORMATION
Also read the precautions and requirements in the following chapters:
▪ "2General safety precautions"[47]
▪ "6.1Preparing the installation site"[424]
6.3.3 To provide the installation structure
Check the strength and level of the installation wall so that the unit will not cause
any operating vibration or noise.
Use a vibration-proof rubber (field supply) to avoid vibration, that may be
transmitted to the building.
Fix the unit securely by means of foundation bolts in accordance with the
foundation drawing.
a 100mm above expected level of snow
6.3.4 To install the outdoor unit