Daikin Sensira Series - Page 105

2 | Components
Service manual
105
FTXF20~71A + FTXF20~25B + FTXF20~42C + ATXF20~71A + ATXF20~42C
+ RXF20~71A + RXF20~60B + RXF20~42C + ARXF20~71A + ARXF20~42C
Split Sensira R32
ESIE18-12E – 2021.02
5 Remove the wire clamp.
6 Remove the screws that fix the right side plate assembly.
7 Cut the cable tie.
a
b
a Cable tie
b Switch box
8 Lift and remove the switch box from the outdoor unit.
9 To install the switch box, see "2.10Plate work"[4101].
To install the switch box
INFORMATION
This procedure is just an example and may differ on some details for your actual unit.
1 Install the switch box on the correct location in the outdoor unit.
2 Install the right side plate assembly on the outdoor unit and fix it using the
screws.