What to do if none of the LEDs light on my Daikin Siesta ATXM35N2V1B?
Try operating the unit with the user interface. Turn the unit off and then back on. Make sure the LEDs are not disabled in the application. Check if the adapter is installed correctly.
What to do if other electric appliances start to operate when using my Daikin Air Conditioner?
If the user interface signals operate other electric appliances, move the other appliances away.
What to do if the user interface display of my Daikin Siesta ATXM35N2V1B Air Conditioner indicates the unit number, the operation lamp flashes and the malfunction code appears?
Notify your installer and report the malfunction code.
What to do if an abnormal function happens during operation of my Daikin Siesta ATXM35N2V1B?
The air conditioner may malfunction because of lightning or radio waves. Turn the breaker OFF and back ON.
Why do the Daikin Siesta ATXM35N2V1B Air Conditioner flaps do NOT start to swing immediately?
The indoor unit is adjusting the position of the flaps. The flaps will start moving soon.
Why does my Daikin Siesta ATXM35N2V1B Air Conditioner system suddenly stop operating?
Check to ensure that the air inlet or outlet of both the outdoor and indoor units are not blocked by any obstacles. Remove any obstructions to allow free airflow. Also, the air conditioner might stop temporarily due to large voltage fluctuations to protect itself, but it should resume operation automatically after about 3 minutes.
What to do if the Daikin Siesta ATXM35N2V1B Air Conditioner unit does NOT receive signals from the user interface?
Check the batteries in the user interface. Ensure the transmitter is not exposed to direct sunlight. Check if there are any electronic starter type fluorescent lamps in the room.
Why does my Daikin Siesta ATXM35N2V1B fan stop during airflow operation?
If the set temperature is reached, the airflow rate is reduced and operation stops. Operation will resume automatically when the indoor temperature rises or falls.
What to do if the user interface display of Daikin Air Conditioner is blank?
Replace the batteries in the user interface.
Why cooling operation CANNOT be selected on Daikin Siesta ATXM35N2V1B?
If your Daikin Air Conditioner does not allow you to select cooling operation, check if your system is not a heating-only version.
General| Brand | Daikin |
|---|---|
| Model | Siesta ATXM35N2V1B |
| Category | Air Conditioner |
| Language | English |
Critical warnings and safety guidelines for the end-user during operation and maintenance.
Explanation of icons, symbols, and status indicators shown on the remote control's LCD screen.
Instructions on how to send commands from the remote control to the air conditioner unit.
How to select operation modes (Cooling, Heating, Fan, etc.) and set the desired temperature.
Adjusting airflow rate and direction (vertical, horizontal, 3D) for optimal air distribution.
Using comfort airflow and Intelligent Eye sensor for personalized comfort and energy saving.
Activating Econo mode for energy efficiency and quiet operation for reduced noise.
Setting ON/OFF timers and weekly timers for automated operation scheduling.
Connecting the unit to a wireless network and using the Daikin Online Controller application.
Guide to interpreting error codes displayed by the unit and basic troubleshooting steps.
Solutions for common issues encountered with the wireless LAN adapter and mobile app.
Diagnosing system issues by observing the status indicator LEDs on the outdoor unit.
To Next Page