Daikin Super Multi Plus E-Series CTXG50EV1BW - Page 361

SiBE18-821_C Service Check Function
Troubleshooting 349
5 Press the MODE button. The right “0” (lower digit) indication of the error code blinks.
6 Press the UP or DOWN button and change the error code lower digit until the receiver
of the remote controller generates a continuous beep.
7 Press the MODE button to return to the normal mode. If you do not press any button for
1 minutes, the remote controller automatically returns to the normal mode.
Step Action
MODE button
(R11290)
UP button
DOWN button
(R11291)
UP
DOWN
MODE button
(R11292)