COPY
Program 1 Program 2 Program 3 Program 4
ON OFF ON OFF
[Monday]
Program 1 Program 2 Program 3 Program 4
ON OFF ON OFF
Setting Displays
Confirmation Copy Paste Normal
1.
Press .
3.
Press .
• The whole reservation of the selected day of the week will be copied.
5.
Press .
6.
Press to complete the setting.
• “ ” is displayed on the LCD and WEEKLY TIMER operation is activated.
NOTE
Note on copy mode
• The entire reservation of the source day of the week is copied in the copy mode.
Page 24
• A reservation made once can be copied to another day of the week. The whole reservation
of the selected day of the week will be copied.
2.
Press to confirm the day of the week to be
copied.
4.
Press to select the destination day of the
week.
• Be sure to direct the remote controller toward the indoor unit and check for a receiving
tone and flashing the multi-monitor lamp.
• The reservation will be copied to the selected day of the week. The whole reservation
of the selected day of the week will be copied.
• To continue copying the settings to other days of the week, repeat step
4
and step
5
.
• The multi-monitor lamp blinks twice. The TIMER lamp periodically lights orange.
In the case of making a reservation change for any day of the week individually after copying the content of weekly reservations, press
and change the settings in the steps of setting mode.
[Tuesday]
to
[Friday]
To Next Page
Loading...
Need help?
General
