RA Indoor Unit SiBE18-821_C
218 Operation Manual
3.2.8 ECONO Operation
ECONO Operation
1. Press “ECONO button”.
2. Press “ECONO button” again.
NOTE
1, 2
Time
ECONO operation is a function which enables
efficient operation by limiting the maximum power
consumption value.
This function is useful for cases in which attention
should be paid to ensure a circuit breaker will not
trip when the product runs alongside other
appliances.
To start ECONO
operation
To cancel ECONO
operation
Running current and
power consumption
Normal
operation
ECONO
Mode
Maximum during
normal operation
Maximum during
ECONO Mode
From start up until set
temperature is reached
• This diagram is a representation for illustrative purposes only.
* The maximum running current and power consumption of the air conditioner in ECONO
mode vary with the connecting outdoor unit.
• ECONO Operation can only be set when the unit is running. Pressing the OFF button
causes the setting to be canceled, and the “ ” disappears from the LCD.
• ECONO operation is a function which enables efficient operation by limiting the power
consumption of the outdoor unit (operating frequency).
• ECONO operation functions in AUTO, COOL, DRY and HEAT modes.
• POWERFUL and ECONO operation cannot be used at the same time.
Priority is given to the function of whichever button is pressed last.
• Power consumption may not drop even if ECONO operation is used of the level of power
consumption is already low.
• “ ” is displayed on the LCD.
• “ ” disappears from the LCD.
To Next Page
Loading...
Need help?
General
