RA Indoor Unit SiBE18-821_C
222 Operation Manual
To use WEEKLY TIMER operation
1. Press “ button”.
2.
3. Press “NEXT button”.
4.
Press “SELECT button” to select the desired mode.
5. Press “NEXT button”.
6. Press “SELECT button” to select the desired time.
7. Press “NEXT button”.
Setting mode
3, 5, 7
1
2, 4, 6
6:00 8:30 17:30 22:00
25˚C 27˚C
Program 1 Program 2 Program 3 Program 4
ON OFF ON OFF
[Monday]
ON OFF Blank
ON TIMER OFF TIMER blank
Day and number settings
ON/OFF settings Time settings Temperature settings
Setting Displays
•
Make sure the day of the week and time are set.
If not, set the day of the week and time.
Press the “SELECT button” to select the desired
day of the week and reservation number.
•
Pressing the “SELECT button” changes the
reservation number and the day of the week.
• Pressing the “SELECT button” changes
“ ” or “ ” setting in sequence.
•
The day of the week and the reservation
number of the current day will be displayed
.
• 1 to 4 settings can be made per day.
•
The day of the week and reservation number will be set.
• “ ” and “ ” blink.
• In case the reservation has already been set, selecting “blank” deletes the reservation.
• Go to STEP 9 if “blank” is selected.
• The ON/OFF TIMER mode will be set.
• “ ” and the time blink.
• The time can be set between 0:00 and 23:50 in 10 minute intervals.
• To return to the ON/OFF TIMER mode setting, press “BACK button”.
• Go to STEP 9 when setting the OFF TIMER.
• The time will be set.
• “ ” and the temperature blink.
To Next Page
Loading...
Need help?
General
