RA Indoor Unit SiBE18-821_C
240 Operation Manual
3.3.5 POWERFUL Operation
POWERFUL Operation
1. Press “POWERFUL button”.
2.
NOTE
1, 2
POWERFUL operation quickly maximizes the
cooling (heating) effect in any operation mode.
You can get the maximum capacity.
To start POWERFUL
operation
To cancel POWERFUL
operation
Press “POWERFUL button”
again.
•
POWERFUL operation ends in 20 minutes.
Then the system automatically operates
again with the settings which were used
before POWERFUL operation.
• When using POWERFUL operation,
there are some functions which are not
available.
• “ ” is displayed on the LCD.
Notes on POWERFUL operation
• POWERFUL Operation cannot be used together with QUIET, or COMFORT Operation.
Priority is given to the function of whichever button is pressed last. (This does not include
QUIET operation.)
• POWERFUL Operation can only be set when the unit is running. Pressing the operation
stop button causes the settings to be canceled, and the “ ” disappears from the LCD.
• In COOL and HEAT mode
To maximize the cooling (heating) effect, the capacity of outdoor unit must be increased
and the air flow rate be fixed to the maximum setting.
The temperature and air flow settings are not variable.
• In DRY mode
The temperature setting is lowered by 2.5˚C and the air flow rate is slightly increased.
• In FAN mode
The air flow rate is fixed to the maximum setting.
• “ ” disappears from the LCD.
To Next Page
Loading...
Need help?
General
