SiBE18-821_C SA Indoor Unit - FFQ, FCQ, FDBQ, FBQ, FHQ Series
Operation Manual 277
20 English
Ventilation Operation
When Air Conditioner Interlocked with Total Heat Exchanger
Preparation
Operation Method
1
2
3
4
5
Basic Operation Method (Use of Direct Buttons)
•
For mechanical protection purposes, turn ON the system at least six hours before starting the
operation of the system.
•
Do not turn OFF the system in season in order to ensure the smooth starting of the system.
•
Set the Operation mode selector
button to Ventilation in the case of
operating the total heat exchanger
without the system between seasons.
•
To change the ventilation mode setting, make
necessary settings from the main menu
(see page 33).
* Ventilation mode: Automatic, Heat exchange, and Bypass
•
To change the ventilation rate, make necessary
settings from the main menu
(see page 32).
* Ventilation rate: Low or High
•
Press On/Off button.
The Operation lamp (green) will be lit
and the system will start operating.
•
The Operation lamp will be turned OFF
and the system will stop operating
when On/Off button is pressed again.
To Next Page
Loading...
