RA Indoor Unit SiBE18-821_C
208 Operation Manual
FVXS25/35/50FV1B
Adjusting the Airflow Direction
1.
2.
1, 2
HEAT
You can adjust the airflow direction to increase
your comfort.
To adjust the horizontal
blade (flap)
Press “SWING button ”.
• “ ” is displayed on the LCD and the
flaps will begin to swing.
When the flap has reached
the desired position,
press “SWING button ”
once more.
To adjust the vertical
blades (louvers)
Hold the knob and move the louver.
(You will find a knob on the left-side and the
right-side blades.)
Notes on flap and louvers angle
H
COOL/
DRY
• The flap will stop moving.
• “ ” disappears from the LCD.
• Unless “SWING” is selected, you should set the
flap at a near-horizontal angle in HEAT mode and
at a upward position in COOL or DRY mode to
obtain the best performance.
ATTENTION
• When adjusting the flap by hand, turn off the unit,
and use the remote controller to restart the unit.
• Be careful when adjusting the louvers. Inside the
air outlet, a fan is rotating at a high speed.
To Next Page
Loading...
Need help?
General
