DAITEM DP8000 - Page 24

24
Daitem
Preparation
GB
12345678
O
N
910
12345678
O
N
910
● ALARM CHANNELS (Intrusion Alarm, Tamper, Technical 1 or Alert), Prealarm CHANNEL and Light CHANNEL.
Note: applications that can be added are indicated in this table (ex.: applications A and C can be added as seen in row A + C of the table).
Active channel
Intrusion alarm, Tamper,
Technical 1 or Alert
Intrusion alarm, Tamper,
Technical 1 or Alert
Light
Light
Pre-alarm (loud or quiet)
Intrusion alarm, Tamper,
Technical 1 or Alert
Light
Intrusion alarm, Tamper,
Technical 1 or Alert
Light
Intrusion alarm, Tamper,
Technical 1 or Alert
Light
Intrusion alarm, Tamper,
Technical 1 or Alert
Light
Timed (3 mins)
Timed (30 mins)
Timed (3 mins)
Latching
Timed (10 secs)
Timed (3 mins)
Timed (3 mins)
Latching
Timed (30 mins)
Timed (3 mins)
Timed (30 mins)
Latching
Relay deactivated by an Off command*
Relay deactivated by an Off command*
Timer re-triggered by a new press
on the light button
Relay activated by a press on the light
button and deactivated by a new press
Relay deactivated by an Off command*.
Only possible with the D14000 control
panel unit
If the relay is activated by the light
channel, an Off* command will not
deactivate it
Operating
modes
Functionality
Position
of micro-switches
Arm (Total only)
and disarm
confirmation
A
B
C
D
E
A
+
C
A
+
D
B
+
C
B
+
D
12345678
O
N
910
12345678
O
N
910
12345678
O
N
910
12345678
O
N
910
12345678
O
N
910
12345678
O
N
910
12345678
O
N
910
Place
switch 5
to on.
Activation
of the relay
for 2 secs
to confirm
Off or Total
arm.
If the relay
is already
active, the
confirmation
of the Off or
the Total arm
is done
by a 2 secs
deactivation
of the relay.
* Retransmission from control panel only
}
}
}
www.absolualarme.com met à la disposition du public, via www.docalarme.com, de la documentation technique dont les références, marques et logos, sont la propriété des détenteurs respectifs