GB
4.2 Duration of alarm sounding
Siren alarm sounding can be delayed by 60 seconds maximum. This gives users enough
time to disarm the system before the alarm siren sounds if, for instance, they have pressed
the wrong button. To delay sounding, enter:
Factory setting: 0 s
siren n° from 0 to 60 s
4.1 Delayed alarm sounding upon intrusion
To modify the duration of sounding, enter:
Factory setting: 90 s
siren n° from 20 to 180 s
For greater user-friendliness, the sound level can be increased or decreased. To do this,
enter:
Factory setting: 4 = average
siren n° from 1 to 8
4.3 Sound level of arm and disarm command indications
To modify the transfer of indications, enter:
Factory setting: 2
siren n° 0: disabled
1: sounding
2: vocal message (“bip, bip, bip, bip, Off or Armed”)
4.4 Transfer of arm and disarm command indications
To Next Page
