Dakota Digital MLX-2000 User Manual

1 MAN# 650665:A
MLX-2000
TANK MOUNT 5” SPEEDOMETER/TACHOMETER
For 2003 and earlier Harley Davidson models with “fat bob” style tank-mount instrument
The MLX-2000 kit includes:
*To avoid damage to motorcycle, please see Speedometer, Tachometer, and Status and Warning Indicators sections
for details on locating VSS, Tachometer, and indicator wires for most motorcycle applications
IMPORTANT NOTE!
This gauge has an odometer preset option that is only available for the first 100 miles (160km) of
operation. See “preset odometer” on page 11 for instructions.
Foam tape
Deuce mount
8-32 x ½”
screws
#8 Lock
washers
Rubber studs
#L-brackets
#8-32 nuts
Main harness
Sensor harness
Speed harness
MLX display
MBM
harness

Dakota Digital MLX-2000 Specifications

General

Brand	Dakota Digital
Model	MLX-2000
Category	Motorcycle Accessories
Language	English

Summary

Gauge Installation Options

Installation with Cable Drive Speedometer

Instructions for installing the gauge with a cable drive speedometer and rubber mounts.

Installation with Factory Electronic Speed Sensor

Instructions for installing the gauge using the factory electronic speed sensor and L-brackets.

Installation for Deuce Models

Specific instructions for installing the gauge on Deuce models using the supplied mounting ring.

Wiring Diagram and Connections

Wiring Installation Overview

Programming Menus

Setup Menu Overview

Guide to the main and sub-menus for configuring gauge settings.

Configuration Setup

Bluetooth Menu Configuration

Lighting Menu and Color Customization

Speedometer Setup Menu

Speed Adjustment and Calibration

How to adjust and calibrate the speedometer reading.

Automatic Speed Calibration

Procedure for auto-calibrating speed over a measured distance.

Speed Unit Selection (MPH/km/h)

Setting the preferred unit for speed display.

Service Interval Reset Configuration

Setting or disabling the service reminder mileage.

Odometer Preset

Instructions for setting the initial odometer reading within the first 100 miles.

Tachometer Setup Menu

Tachometer Input Signal Setup

Configuring tachometer signal type, cylinder count, and input voltage.

High RPM Warning Setup

Oil Temperature Setup Menu

Sender and Unit Configuration

High Temperature Warning

Oil Pressure and Voltage Setup

Oil Pressure Warning Setup

Voltage Warning Setup

Troubleshooting Guide