Need help?Do you have a question about the Dali IO and is the answer not in the manual?
Initial setup, switching on, and battery status indication.
Instructions for pairing headphones with Bluetooth audio sources.
Guide to connecting headphones via analog mini-jack and USB cables.
Details on controlling playback, calls, and virtual assistants via buttons.
Explanation of active noise cancelling and transparency modes for the IO-6 model.
Instructions for removing, cleaning, and replacing the ear pads.
Guidance on cleaning headphone surfaces using soft, lint-free cloths.
Procedures for restarting and resetting the headphones to factory configuration.
Initial setup, switching on, and battery status indication.
Instructions for pairing headphones with Bluetooth audio sources.
Guide to connecting headphones via analog mini-jack and USB cables.
Details on controlling playback, calls, and virtual assistants via buttons.
Explanation of active noise cancelling and transparency modes for the IO-6 model.
Instructions for removing, cleaning, and replacing the ear pads.
Guidance on cleaning headphone surfaces using soft, lint-free cloths.
Procedures for restarting and resetting the headphones to factory configuration.
General| Bluetooth | Yes |
|---|---|
| Noise Cancellation | Active Noise Cancellation (ANC) |
| Driver Size | 50 mm |
| Frequency Response | 10 Hz - 20 kHz |
| Sensitivity | 100 dB |
| Bluetooth Version | 5.0 |
| Bluetooth Codecs | SBC, AAC, aptX, aptX HD |
| Charging Time | 2.5 Hours |
| Cable Length | 1.2 m |
| Type | Over-ear |
| Connectivity | Wireless, Wired |
| Microphone | Built-in |
| Wired Connection | 3.5 mm |
To Next Page
