Dali IO User Manual

3.5 Noise Cancelling (IO-6 only)
IO-6 headphones incorporate active noise cancelling technology
(ANC) that can significantly reduce the disturbance of ambient
noises – for example, general ci noise and aircra cabin noise.
IO-6 noise cancelling technology also incorporates a
transparency option that enables ambient sounds to pass
through the headphones unimpeded. Transparency can enable
you to hear conversations or important ambient sounds without
the need to remove your headphones.
Noise cancelling is controlled from a push buon on the edge of
the right headphone cup.
Press the buon once to engage full noise cancelling and a
second time to select the transparency option.
Press the buon once again to disengage noise cancelling and
transparency.
3. USING YOUR DALI IO HEADPHONES
ANC
(DALI IO-6 )
10

Dali IO Specifications

General

Bluetooth	Yes
Noise Cancellation	Active Noise Cancellation (ANC)
Driver Size	50 mm
Frequency Response	10 Hz - 20 kHz
Sensitivity	100 dB
Bluetooth Version	5.0
Bluetooth Codecs	SBC, AAC, aptX, aptX HD
Charging Time	2.5 Hours
Cable Length	1.2 m
Type	Over-ear
Connectivity	Wireless, Wired
Microphone	Built-in
Wired Connection	3.5 mm