Dali IO User Manual

4.1 Ear Pads
IO headphone ear pads can be removed for cleaning or
replacement. The ear pads aach via a bayonet fiing.
To remove an ear pad, simply turn it anti-clockwise and li it
away from the headphone cup.
Replacement ear pads can be ordered through your local
DALI retailer or distributor, or directly from DALI at
www.dali-speakers.com
4. MAINTAINING YOUR
DALI IO HEADPHONES
NOTE
When replacing ear pads
ensure that they are
rotated fully clockwise
and click twice into
position. Incorrectly
fied ear pads will impact
on headphone bass
reproduction and noise
cancelling performance.
4.2 Cleaning
If your headphones need cleaning, wipe their surfaces with a so,
lint-free cloth. A slightly damp cloth may be used for stubborn
marks, but it is important that your headphones do not get wet.
The use of abrasive or solvent based cleaning fluids is not
recommended.
Twist the ear pad
anti-clockwise to
remove it.
Use markings on ear pad and
housing to align ear pad correctly.
11

Dali IO Specifications

General

Bluetooth	Yes
Noise Cancellation	Active Noise Cancellation (ANC)
Driver Size	50 mm
Frequency Response	10 Hz - 20 kHz
Sensitivity	100 dB
Bluetooth Version	5.0
Bluetooth Codecs	SBC, AAC, aptX, aptX HD
Charging Time	2.5 Hours
Cable Length	1.2 m
Type	Over-ear
Connectivity	Wireless, Wired
Microphone	Built-in
Wired Connection	3.5 mm