Dali IO User Manual

NOTE
IO-6 noise cancelling
will not function, and
headphone audio quali
may be slightly diminished
when the headphones
are used in passive mode.
If your headphones
are playing audio via
a Bluetooth or USB
connection when a mini-
jack plug is inserted, the
mini-jack connection will
take priori.
3.3 Wired Connections
Analog Audio Connections
You can use a mini-jack cable to connect your
IO headphones to a device with a conventional
headphone output.
Simply connect the supplied cable to the
socket in the le headphone cup and to the
source device’s headphone socket.
Your IO headphones don’t need to be switched
on to play audio via a mini-jack cable connection
so they can be used in this passive mode even
if their baery is exhausted, however for
optimum sound quali they are always best
used in active mode.
3. USING YOUR DALI IO HEADPHONES
7

Dali IO Specifications

General

Bluetooth	Yes
Noise Cancellation	Active Noise Cancellation (ANC)
Driver Size	50 mm
Frequency Response	10 Hz - 20 kHz
Sensitivity	100 dB
Bluetooth Version	5.0
Bluetooth Codecs	SBC, AAC, aptX, aptX HD
Charging Time	2.5 Hours
Cable Length	1.2 m
Type	Over-ear
Connectivity	Wireless, Wired
Microphone	Built-in
Wired Connection	3.5 mm