dallmeier DMS 2400 - HDD Exchange Advice

26
SERVICE – DMS 2400 (MK 3) | REV 1.0.0 | © 2022 Dallmeier
➡
Check the status of the hard disk drives in the display.
➡
Identify the failed hard disk drive on the information dialog as described
above.
Exchange
When a hard disk drive fails, the corresponding recordings are lost. However
recording is continued on the remaining hard disk drive. The replacement of
the hard disk drive is not possible during operation.
In the case of service it is recommended to make a backup of essential recor-
dings rst.
After replacing the hard disk drive, all tracks have to be initialized and in this
process all recordings will be lost. The settings of the device are completely
preserved.