dallmeier DMS 2400 - System Parameters; Restoring Default Parameters; Exporting System Parameters

21
SERVICE – DMS 2400 (MK 3) | REV 1.0.0 | © 2022 Dallmeier
9 System Parameters
Default Parameters
The original conguration of the SMAVIA Recording Server can be restored
by resetting to the default system parameters.
NOTICE
Data loss!
➡
If the device is reset to the default system parameters, all recordings
and recording settings will be lost.
➡
Open the System Parameters dialog via System > System Parameters
> Default.
➡
Click OK.
The default system parameters will be restored.
Export Parameters
The system parameters can be exported. After export they can be archived