42
PARTS ORDERING PROCEDURE
Your Dalton Ag dealer is interested in your new fer lizer applica on equipment and has the desire to help you get the
most value from it. Through the help of this manual, you will fi nd you can do some of the regular maintenance yourself.
For parts and service, contact the Dalton Ag Dealership from which you purchased your fer lizer applica on equipment
or your local Dalton Ag dealer.
When replacement parts are required, consult the applicable illustra on and parts list to obtain the correct part name
and number. When reques ng a replacement part, always include the following informa on:
1. Complete Part Number
2. Descrip on
3. Quan ty Required
4. Machine and Model Number
5. Machine Serial Number - located on the topside of the frame near hitch
6. Provide complete name and address for where and how parts are to be shipped.
NOTE: Right and le hand parts and sides of the units are determined by standing at the rear and facing in the direc on
of forward travel.
EQUIPMENT MODEL:___________________________________
EQUIPMENT SERIAL NO.:________________________________
DATE OF PURCHASE:___________________________________
NAME OF DEALER:_____________________________________
DEALER’S PHONE NUMBER:______________________________
Thank you for your business!
DaltonAg.com 800.342.7498
602 E. Van Buren Lenox, Iowa 50851
To Next Page
Loading...