User manual for DM700 ECDIS hardware
Copyright Danelec Marine A/S
MAN11804-10 Page 26/30
Possibly a disconnected or defective
network cable. Verify all network
cables are connected correctly, and
check that link is present for both
Ethernet ports 1 and 2.
Low disk space. Less than x MB
left on disk
The disk is almost full.
The operational state of the ECDIS
will soon be compromised.
Remove unused chart databases.
The disk is full.
The operational state of the ECDIS
is now compromised.
Remove all unused chart databases,
routes, logbooks, etc.