EasyManuals Logo
Home>Danfoss>Control Unit>ADAP-KOOL AK-CT 200A

Danfoss ADAP-KOOL AK-CT 200A User Manual

Danfoss ADAP-KOOL AK-CT 200A
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
16 User Guide RS8GR602 © Danfoss 2016-10 AK-CT 450A
7
8
Hot gas defrosting.
Hot gas defrosting is adapted to commercial appliances/
rooms with limited system lling.
One relay controls the main valve in the suction line.
One relay controls the hot gas valve.
One relay controls the drain valve.
There is no time delay between stops of hot gas and start
of draining.
”Two-compressor” operation.
The two compressors must be of the same size. On start-up
(after defrosting, operational stop, etc.) both compressors are
started with a set time shift. One compressor starts at half the
dierential so that an optimum adaptation of compressor
capacity takes place for the current load in the appliance/
room. There is automatic runtime equalisation between the
compressors.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Danfoss ADAP-KOOL AK-CT 200A and is the answer not in the manual?

Danfoss ADAP-KOOL AK-CT 200A Specifications

General IconGeneral
BrandDanfoss
ModelADAP-KOOL AK-CT 200A
CategoryControl Unit
LanguageEnglish

Related product manuals