68 RS8HP102 © Danfoss 2018-09 AK-CC 750A
6. Move on with the next display for the section. Here
the expansion valve function
Press the blue overview button at the bottom left of the dis-
play..
7. Settings for the injection function
8. Repeat for Evaporator B and later again for C
,
9. Go to defrost display
Press the blue overview button at the bottom left of the display
and then press the defrost symbol
,
10. Settings for defrost
11. Go to defrost schedule
Press the schedule button to continue to the defrost schedule
Check of settings - continued
Remember the settings at the bottom of the pages – the ones
that can only be seen via the ”Scroll bar”.
Remember the settings at the bottom of the pages – the ones
that can only be seen via the ”Scroll bar”.
The settings can be reviewed in the same way as for section A.
To Next Page