Danfoss AK-PC 351 - Display Overview; End-User Interface Examples

6 User Guide RS8GZ302 © Danfoss 2015-06 AK-PC 351
Display overview
End-user overview
The images in this daily user interface will depend on how the set-up is made. They will illustrate what is regulated.
For example: One suction group, one condenser group, or a combination. See examples below:
1 condenser
group
1 suction
groupe
1 suction group
and
1 condenser
group
When an alarm is sent from the controller,
you must advance to this
display to see the
alarm text.
Status = either 1 suction group or 1 condenser group or Both suction group
and condenser group
Parameters
Access to the menus requires pass-
word.
Level 1: Only view (100)
Level 2: Change values (200)
Level 3: Change conguration (300).
Select a line and
press "Enter" 
Press "Enter" 
to get to the overview