Danfoss Ally Application Guide

3
AB440847594423en-000103 © Danfoss | FEC | 2023.12 |
Application Guide Heating Control Danfoss Ally™
1. Introduction
1.1 Segment
This application guide covers the use of Danfoss Ally™.
1.2 Overview of the units in the Danfoss Ally™ system
Danfoss Ally™ Gateway
Danfoss Ally™ Gateway is a programmable, wireless control system that connects all the
Danfoss Ally™ devices to the internet and intelligently controls your heating via a free app
downloadable from Google Play and App Store.
Danfoss Ally™ Radiator Thermostat
Danfoss Ally™ Radiator Thermostat is a connected radiator thermostat for residential use.
ItisaZigbee 3.0 certied product, compatible with the Danfoss Ally™ Gateway and with third
party systems using Zigbee protocol.
Danfoss Ally™ Room Sensor
Danfoss Ally™ Room Sensor measures temperature and humidity in a room and makes sure
each radiator delivers the exact amount of heat needed for temperature perfection.
Danfoss Ally™ Zigbee repeater
Is used for extending wireless transmission range between the Danfoss Ally™ Gateway and
other units in the system.
Danfoss Icon™/Icon2™
Advanced room controls for hydronic oor heating and other applications with actuators.
Designed like a light switch to complement the interior.

Danfoss Ally Specifications

General

Accuracy	50 sec/month
Noise level	30 dB
Product color	White
Smart thermostat	Yes
Operating frequency	2400 MHz
Suitable for indoor use	-
Maximum water temperature	90 °C
Storage temperature (T-T)	-20 - 65 °C
Temperature control range	5 - 35 °C
Operating temperature (T-T)	0 - 40 °C
International Protection (IP) code	IP20
Package weight	250 g
Display type	LCD
Battery type	AA
Power consumption (typical)	1.2 W

Weight and Dimensions

Weight	198 g
Diameter	55 mm