Danfoss Ally Application Guide

4
| © Danfoss | FEC | 2023.12 AB440847594423en-000103
Application Guide Heating Control Danfoss Ally™
1.3 Number of units in the Danfoss Ally™ system
When building the Danfoss Ally™ system it is important to remember that the total number of units
for the one Danfoss Ally™ Gateway
must not exceed 199 mains and battery-powered devices:
Danfoss Ally™ Radiator Thermostat
32 units
Danfoss Ally™ Room Sensor
Danfoss Ally™ Zigbee Repeater
199 units
Danfoss Ally™ Boiler Relay
Danfoss Icon™ Zigbee Module / Danfoss Icon™ Master Controller
(oor heating)
Danfoss Icon2™ Main Controller (oor heating)
Danfoss Icon™ Room Thermostat
Danfoss Icon2™ Room Thermostat
Number of devices per room 50 units
Number of rooms per Home/Family 20 pcs.
Number of Homes/Families per one account 20 pcs.
Number of devices per account (20 homes/families and 200 units per each) 4000 units
Number of Home/Family members per one account 20 pcs.
Number of devices per one Home/Family 200 units

Danfoss Ally Specifications

General

Accuracy	50 sec/month
Noise level	30 dB
Product color	White
Smart thermostat	Yes
Operating frequency	2400 MHz
Suitable for indoor use	-
Maximum water temperature	90 °C
Storage temperature (T-T)	-20 - 65 °C
Temperature control range	5 - 35 °C
Operating temperature (T-T)	0 - 40 °C
International Protection (IP) code	IP20
Package weight	250 g
Display type	LCD
Battery type	AA
Power consumption (typical)	1.2 W

Weight and Dimensions

Weight	198 g
Diameter	55 mm