Danfoss Ally Application Guide

8
| © Danfoss | FEC | 2023.12 AB440847594423en-000103
Application Guide Heating Control Danfoss Ally™
• Pre-heat is sensitive to large, rapid temperature changes.
6
6
12
39
6
Winter: Long warm up time.
12
39
6
Spring/fall: Short warm up time.
2.3 Rooms
Covering the radiator – e.g. with furniture, curtains or a radiator cover – might cause heat to be
accumulated around the thermostat.
Light curtain/furniture:
You can use Radiator Thermo-
stat, but function is improved
by using a Danfoss Ally™
Room Sensor.
Medium curtain/furniture:
Use with Danfoss Ally™ Room
Sensor.
Radiator cover:
Use with Danfoss Ally™ Room
Sensor.
If two radiators are placed within 40 cm of each other, the
heat emission from one radiator can aect the thermostat on
the other radiator. In such cases it is recommended to install
Danfoss Ally™ Room Sensor.

Danfoss Ally Specifications

General

Accuracy	50 sec/month
Noise level	30 dB
Product color	White
Smart thermostat	Yes
Operating frequency	2400 MHz
Suitable for indoor use	-
Maximum water temperature	90 °C
Storage temperature (T-T)	-20 - 65 °C
Temperature control range	5 - 35 °C
Operating temperature (T-T)	0 - 40 °C
International Protection (IP) code	IP20
Package weight	250 g
Display type	LCD
Battery type	AA
Power consumption (typical)	1.2 W

Weight and Dimensions

Weight	198 g
Diameter	55 mm