Danfoss CVP - User Manual

Installation guide
Pilot valves
CVP, CVPP, CVC, CVE and EVM
027R9594
027R9594
© Danfoss | DCS (MWA) | 2017.03
DKRCI.PI.HN0.P3.02 | 520H10898 | 1
CVP
CVPP
CVC
CVE
EVM NC EVM NO
Fiber:
x3 - ICS3
x1 - ICS1
CVP, CVPP, CVC, CVE,
EVM NC & EVM NO:
50 Nm (35 ft-lbs)
32 mm
(1¼ in.)
O-ring
CVP, CVPP, CVC:
10 Nm (7 ft-lbs)
CVPP, CVC:
40 Nm (28 ft-lbs)
CVPP:
50 Nm (35 ft-lbs)
WWYY (Week/Year)
Product label:

Summary

Pilot Valves: Overview and Specifications

Pilot Valve Model Illustrations

Diagrams showing CVP, CVPP, CVC, CVE, EVM NC, and EVM NO pilot valve models.

Pilot Valve Installation Details

Key details for installation including O-ring, fiber connections, and torque specifications.

Pilot Valve Product Label

Information regarding the product label used for valve identification and traceability.

Pilot Valve Technical Data

CVP Pressure Range and Settings

Details on pressure ranges, factory settings, and 1 Rev (360°) settings for CVP pilot valves.

CVPP Pressure Range and Settings

Details on pressure ranges, factory settings, and 1 Rev (360°) settings for CVPP pilot valves.

CVC Pressure Range and Settings

Details on pressure ranges, factory settings, and 1 Rev (360°) settings for CVC pilot valves.

CVE Pressure Setting Chart

Chart detailing CVE pressure settings in barg, psig, mA, and ICAD reading percentage.

CVE Operational Guidance

Information on CVE valve sealing and packing gland leak tightening.

Danfoss CVP Specifications