To Next PageTo Next Page
Need help?Do you have a question about the Danfoss SVA-S and is the answer not in the manual?
General| Type | SVA-S |
|---|---|
| Category | Control Unit |
| Operating Voltage | 24 V AC/DC |
| Ambient Temperature Range | -20 °C to +60 °C |
| Protection Class | IP20 |
| Housing Material | Plastic |
| Weight | 0.2 kg |
| Relative Humidity | 95% (non-condensing) |
Lists compatible refrigerants and circuit type for valve usage.
Specifies the operational temperature limits for the valve.
Indicates the maximum designed working pressure for the valves.
Details valve orientation and piping system considerations for mounting.
Guides installation based on flow arrow and manual force limits.
Outlines bonnet removal and protection during welding operations.
Explains replacing the packing gland and associated precautions.
Describes the procedure for fully opening the valve spindle.
Details equalizing pressure before gland removal.
Outlines the steps required to safely remove the packing gland.
Provides checks and precautions before dismantling the valve.
Details the steps for replacing the valve's internal cone.
Covers reassembly after component replacement or repair.
Specifies torque values for bonnet and gland tightening.
