Danfoss DEVItector II V2 - Page 13

DEVItector™ II V2User Guide
BC421332622232en-010101 2022.07 | FEC | ©Danfoss | 13
Trace menu
1. From the main menu, turn the knob to select menu
item “Trace”
2. Press the knob once to enter the tracing menu.
3. Select a proper value of the tracing voltage.
Setup menu
1. From the main menu, turn the knob to select menu
item “Setup”.
2. Press the knob once to enter the setup menu.
3. Turn knob to set the Autostop Current to the
desired value, e.g. 1,00 Ampere.