2.6 Application update
The controller application can be updated when connected to
the mobile application. After the process of application update is
activated, the user will be guided through and the led indication
will be represented according to the picture to the right.
When the application update is completed the controller indication
will be according to the described modes.
Application update is ongoing
—————————————>
During the controller application update, the controller will not be
controlling the heating circuit and should not be powered off.
The controller might restart several times during update.
AQ428842090782en-010102
© Danfoss | 2022.12 | 11
Operating Guide ECL Comfort 120 controller and app
To Next Page
Loading...
