Danfoss ECL Comfort 120 - Alarm and Error Indicators

2.3.3 Alarm or error indication
In case of faulty / missing sensor the system LED is blinking red.
If a mandatory sensor is detected as missing or faulty the controller
will stop and the error LED will be ON.
The detailed cause can be seen in the mobile application under
menu Alarms.
In this case it is necessary to call maintenance or authorized
personal.
When the error/fault is resolved the controller will again control the
process according to settings.
Alarm is active
Alarm & Bluetooth are active
8 | © Danfoss | 2022.12
AQ428842090782en-010102
Operating Guide ECL Comfort 120 controller and app