Danfoss ECL Comfort 296 - Page 117

Example,minimumreturntemperaturelimitation;
returntemperaturegetslowerthanlimit
T
=
Temperature
Y
=
Temperature
X
=
Time
#1#
=
Returntemperature
#2#
=
Returntemperaturelimit
#3#
=
Desiredflowtemperature
#4#
=
Actionpoint
ParametersindicatedwithanIDno.like"1x607"meanauniversal
parameter.
xstandsforcircuit/parametergroup.
MENU>Settings>Returnlimit
Con.T,re.Tlim.(Constanttemperaturemode,return
temperaturelimitation)
1x028
The"Con.T,ret.Tlimit"isthereturntemperaturelimitationvaluewhenthe
circuitissettooverridemodetype"Const.T"(=Constanttemperature).
SeeAppendix“ParameterIDoverview”
Value:Setthereturntemperaturelimitation
Overridemode
WhenECLComfortisinScheduledmode,acontact(switch)signalcan
beappliedtoaninputinordertooverridetoComfort,Saving,Frost
ProtectionorConstanttemperature.Aslongasthecontact(switch)
signalisapplied,theoverrideisactive.
VI.GU.L2.02
©Danfoss|2017.09|117
OperatingGuideECLComfort210/296/310,applicationA275/A375