Danfoss EKE User Manual

© Danfoss | Climate solutions | 2023.07
Danfoss Related products
Powersupply Temperature sensor Pressure transducer
AK-PS
Input: 100 – 240 V AC, 45 – 65 Hz
Output: 24 V DC: available with 18 VA, 36
VA and 60 VA
ACCTRD
Input: 230 V AC, 50 – 60 Hz
Output: 24 V AC, available with 12 VA,
22 VA and 35 VA
PT 1000
AKS is a High precision temp. sensor
AKS 11 (preferred), AKS 12, AKS 21
ACCPBT PT1000
NTC sensors
EKS 221 ( NTC-10 Kohm) MBT 153
ACCPBT
NTC Temp probe (IP 67 /68)
DST / AKS Pressure Tranducer
Available with ratiometric and 4 – 20 mA.
NSK
Ratiometric pressure probe
XSK
Pressure probe 4 – 20 mA
Stepper motor valves M12 cable Backup power module
EKE is compatible with Danfoss stepper
motor valves i.e Danfoss ETS 6, ETS
5M(Unipolar), ETS, KVS,
ETS Colibri®, KVS colibri®, CTR, CCMT,
ETS 8M (Bipolar), CCMT L, ETS L
M12 Angle cable to connect
Danfoss stepper motor valve and
EKE controller
EKE 2U energy storage device for
emergency valve shutdown during
power outage.
EKA 200 Koolkey EKE 100 service cable
EKA 200 is used as a service/copy key for
EKE 100 controller
EKE 100 service cable is used to
connect EKE 100 controller to EKA
200 Koolkey
AN433741508202en-000203 | 11

Danfoss EKE Specifications

General

Category	Industrial Equipment
Supply voltage	24 V AC/DC
Enclosure rating	IP20
Mounting	DIN rail
Type	Electronic Controller
Communication	Yes
Input	Temperature Sensor