Danfoss EV210B - Identification

3
IC.PS.600.A4.02 / 520B2809
© Danfoss A/S (IA-MC/mhe) 05-2007 / 520B2809IC.PS.600.A4.02 / 520B2809
Ο
Identication of Danfoss solenoid valves:
Illustration 1 shows the label with relevant informa-
tion that is attached to the coil.
The example here is from an EV220B solenoid
valve:
15: 15 mm orice
B: Brass body material
G 12: ISO 228/1, 1/2 inch connection
E: EPDM seal material
NC: Normally closed
Identication
Danfoss
solenoid valves
The coil type (BB230AS) is printed on the front of
the coil as well as voltage (V) and frequency (Hz)
- see illustration 2.
After identication, see the rst section of this
handbook.
1
2
B - Valve
High performance