Danfoss Heating
19
GB
2.3.2 Extend the current set time by 1, 2 or 3 hours
(Fig. 31).
Press the Λ button once for 1 extra hour, twice for 2 extra hours, 3
times for 3 extra hours, and press 4 times to remove override.
The display will indicate the number of extended hours have been
set. A fourth press will cancel the override.
2.3.3 Changing the clock forwards and backwards
This is handled automatically, however, if the manual changeover has
been selected (in Advanced Programming) follow the instructions
below.
To change from Summer to Winter (turn clocks back)
With clock display showing, press and hold the - button until time
moves back.
To change from Winter to Summer (move clocks forward)
With clock display showing, press and hold the + button until time
moves forward.
Fig. 31
GB
To Next Page
Loading...
Need help?
General
