Danfoss FT1330 - Specifications

Danfoss FT1330 Crimp Machine Operator’s Manual
6 | © Danfoss FT1330 Crimp Machine Operator’s Manual | 2023.02.
AQ439269212774en-000101
Specications
Electrical FT1330-1-1
FT1330-1-2 Motor 1 HP, 115 Volt, 50/60 hz, 1 ph
FT1330-1-8
FT1330-1-1-6 Motor 1 HP, 220 Volt, 50/60 hz, 1 ph
FT1330-1-2-6
Dimensions 20” Wide, 29” Deep, 16” High
Weight 255 lbs.
Crimp Die One Cage Per Setup, (Eight dies included in one cage assembly).
Refer to the PowerSource Crimp Spec Tool at danfoss.com/crimp
for crimp spec details including the proper die cage part number.
Maximum Operating Pressure 4,500 psi
Pump
Model A 1 gpm
Model B 2 Stage, 2 gpm to 500 psi, 1 gpm to 4,500 psi
Reservoir
Model A 3 Quart
Model B 3 1/2 Quart
NOTE: BEFORE ATTEMPTING TO OPERATE THE FT1330 CRIMP MACHINE,
THIS MANUAL SHOULD BE READ AND THOROUGHLY UNDERSTOOD.