Danfoss iC7 Series Installation Guide

1 Overview
1.1 Description
The in-bottom/out-back cooling kit fits FA09 and FA10 frequency converters mounted in Rittal TS8 cabinets. When the kit is instal-
led, air flows into the bottom duct and out through the back duct of the frequency converter. See Illustration 1.
6
3
5
1
4
2
e30be922.10
Illustration 1: Direction of Airflow with Kit Installed
1
Top cover
2
Frequency converter
3
Bottom duct assembly
4
Back channel airflow (intake)
5
Back channel airflow (exhaust)
6
Mounting plate
1.2 Kit Numbers
Use these instructions with the following kits.
Table 1: Numbers for In-bottom/Out-back Cooling Kits
Number
Kit description
176F4040
In-bottom/Out-back cooling kit for FA09 frequency converters
176F4041
In-bottom/Out-back cooling kit for FA10 frequency converters
AN371942757356en-000101 / 136R0252 | 1Danfoss A/S © 2022.03
Installation Guide
In-bottom/Out-back Cooling Kit for FA09-FA10
iC7 Series Frequency Converters

Danfoss iC7 Series Specifications

General

Product Type	Media Converter
Power Supply	24 VDC
Housing Material	Plastic
Mounting	DIN Rail
Manufacturer	Danfoss
Protection Class	IP20
Protocols Supported	Modbus
Humidity	5% to 95% (non-condensing)
Weight	150 g
Series	iC7 Series