Need help?Do you have a question about the Danfoss FC 101 and is the answer not in the manual?
General| Model | FC 101 |
|---|---|
| Manufacturer | Danfoss |
| Protection Class | IP20 |
| Relative Humidity | 95% (non-condensing) |
| Communication Interface | RS-485 |
Defines who is qualified to install, commission, and maintain the equipment.
Details critical safety warnings, including high voltage and unintended start hazards.
Covers the physical aspects of installing the frequency converter, including mounting.
Covers all aspects of connecting the frequency converter electrically.
General guidelines for electrical installation, including cabling and temperature compliance.
Details how to connect the power supply and the motor to the converter terminals.
Explains the selection and use of fuses and circuit breakers for protection.
Provides guidelines for ensuring electromagnetic compatibility during installation.
Describes the layout and function of the control terminal block for external connections.
Illustrates the basic wiring schematic for connecting power, motor, and control signals.
Explains the components and operation of the Local Control Panel (LCP) for programming.
Guides the installer through initial setup for open-loop and closed-loop applications.
Details parameters and options for configuring the setup wizard in open-loop mode.
Details parameters and options for configuring the setup wizard in closed-loop mode.
To Next Page
