What to do if I need to identify a drive in Danfoss Industrial Equipment?
To identify a drive within Danfoss Industrial Equipment, enable the function in MyDrive[®] Insight under Device Status. Click the device name while in live mode.
General| Product Type | Media Converter |
|---|---|
| Power Supply | 24 VDC |
| Housing Material | Plastic |
| Mounting | DIN Rail |
| Manufacturer | Danfoss |
| Protection Class | IP20 |
| Protocols Supported | Modbus |
| Humidity | 5% to 95% (non-condensing) |
| Weight | 150 g |
| Series | iC7 Series |
Explains the meaning of danger, warning, caution, and notice symbols used in the guide.
Emphasizes reading safety guidelines and precautions before starting installation.
Provides safety instructions (SHOCK HAZARD) for installing extensions in frequency converters.
Describes the OC7M0 option for connecting speed/position feedback devices and TTL encoder simulation.
Provides examples for connecting incremental encoders, resolvers, and other feedback devices.
Introduces the OC7R0 option for extending relay functions with 3 relay outputs.
Illustrates wiring configurations for the OC7R0 relay option.
Introduces the OC7C0 option, detailing its digital inputs, outputs, and analog capabilities.
Illustrates wiring configurations for the OC7C0 General Purpose I/O option.
To Next Page
