•
•
•
•
•
•
•
1 Introduction
1.1 Purpose of the Operating Guide
This operating guide provides information for safe installation, commissioning, and operation of functional extensions used with
iC7 drives.
This guide is intended for use by qualified personnel only. Read and follow the operating instructions to use the drive safely and
professionally, and pay particular attention to the safety instructions and general warnings. Keep this operating guide available with
the drive at all times.
1.2 Additional Resources
Additional resources are available to help understand the features, and safely install and operate the iC7 products:
Safety guides, which provide important safety information related to installing iC7 drives.
Installation guides, which cover the mechanical and electrical installation of drives, or functional extension options.
Design guides, which provide technical information to understand the capabilities of the iC7 drives for integration into motor
control and monitoring systems.
Operating guides, which include instructions for control options, and other components for the drive.
Application guides, which provide instructions on setting up the drive for a specific end use. Application guides for application
software packages also provide an overview of the parameters and value ranges for operating the drives, configuration exam-
ples with recommended parameter settings, and troubleshooting steps.
Facts Worth Knowing about AC Drives, available for download on www.danfoss.com.
Other supplemental publications, drawings, and guides are available at www.danfoss.com.
Latest versions of Danfoss product guides are available for download at http://drives.danfoss.com/downloads/portal/.
1.3 Version History
This guide is regularly reviewed and updated. All suggestions for improvement are welcome.
The original language of this guide is English.
Table 1: Version History
AQ390830267692, version 0601
Information on configuring General Purpose Option OC7C0 added.
Information on support for more Encoder/Resolver device types added.
AQ390830267692, version 0501
Information on configuring Relay Option OC7R0 added.
AQ390830267692, version 0401
Information on support for SinCos encoders added.
AQ390830267692, version 0301
Updates regarding electrical specifications, and the default value and available selections of
parameter 9.6.6 BiSS/SSI Clock Rate.
AQ390830267692, version 0201
Updates regarding Encoder/Resolver Option OC7M0 features.
AQ390830267692, version 0101
First version.
The information in this version is valid for Encoder/Resolver Option OC7M0 installed in iC7-Au-
tomation frequency converters.
AQ390830267692en-000601 / 136R0273 | 5Danfoss A/S © 2023.06
Introduction
Functional Extension Options
Operating Guide
To Next Page
Loading...
Need help?
General
