Danfoss iC7 Series

Table 27: Digital Output Mapping for Relay Option OC7R0
Bit number
Value
14
Relay X103
13
Relay X102
12
Relay X101
P 9.3.2 Relay 2 Counter
Description: Shows the number of relay switchings.
Default Value: 0
Parameter Type: Range (0 — 4294967295)
Parameter Number: 4910
Unit: -
Data Type: UDINT
Access Type: Read Only
P 9.3.3 Relay 5 Counter
Description: Shows the number of relay switchings.
Default Value: 0
Parameter Type: Range (0 — 4294967295)
Parameter Number: 4911
Unit: -
Data Type: UDINT
Access Type: Read Only
P 9.3.4 Relay 8 Counter
Description: Shows the number of relay switchings.
Default Value: 0
Parameter Type: Range (0 — 4294967295)
Parameter Number: 4912
Unit: -
Data Type: UDINT
Access Type: Read Only
AQ390830267692en-000601 / 136R027348 | Danfoss A/S © 2023.06
Relay Option Installation and
Configuration
Functional Extension Options
Operating Guide